Cleaning Instructions | AccuVein, Inc.

Please note that when cleaning any AccuVein device or accessory, the wipe used (see approved wipes below) should be firmly squeezed to remove excess cleaning fluid. This helps to prevent the pooling of liquid in crevices and depressions, which can damage the plastic.

Caution: Do not submerge any part of AccuVein Products in liquid.

Hard Surfaces

AV500 Device and Accessories (HF580, HF570, HF550 and HF510)

Approved Cleaning Agents

Isopropyl Alcohol (maximum 70%)
PDI Sani-Cloth Plus
PDI Super Sani-Cloth
Pre-moistened bleach wipes (10% or less)
Caviwipes1 or Cavicide1
Cidex Plus
EcoLab Incidin Plus
EcoLab Incidin Pro
EcoLab SaniCloth Active

Additional approved cleaning agents for HF580 ONLY:

EcoLab Incidin Alcohol wipe
EcoLab Incidin Oxyfoam N6
EcoLab Incidin Oxywipe S

Harmful Cleaning Agents

DO NOT USE:

Virex
Bleach solutions that are greater than 10% bleach
Hydrogen Peroxide

These products have been tested and will damage the plastic parts on the equipment.

Optical Surfaces

All AccuVein Devices

Approved Cleaning Agents

Alcohol wipes
Eye glass cleaning cloth

The optical surfaces of the AccuVein are located on the bottom housing.

Electrical Contacts

All AccuVein Devices

Approved Cleaning Agents

Electrical contact cleaner

There are electrical contacts at the bottom of the AccuVein, in the charging cradle, and in the charging cup on the Powered Wheeled Stand. When necessary, use electrical contact cleaner on the electrical contacts.

Hard Surfaces

AV400 and AV300 Devices and Accessories (HF470, HF450 and HF410)

Approved Cleaning Agents

Isopropyl Alcohol (maximum 70%)
10% dilution of chlorine bleach in distilled water
Pre-moistened cloths with 10% bleach such as Clorox Germicidal Wipes

Harmful Cleaning Agents

DO NOT USE:

CaviWipes1^{TM (approved for AV500)}
Cavicide1^{TM (approved for AV500)}
Bleach solutions that are greater than 10% bleach
Hydrogen Peroxide

These products have been tested and will damage the plastic parts on the equipment.